|
|
|
|
Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery This Tripp Lite SmartPro® UPS system features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery weighs 60-percent less than an equivalent lead acid battery, which reduces the overall UPS weight. 120-Volt Battery Backup Keeps Equipment Operating Through Short Power FailuresThe SMART3000RM2UL provides up to 9.5 minutes (half load) and 3.5 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase UPS system gives you enough time to save important data and perform an orderly system shutdown. With a 2250W capacity (3000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-145V without using battery power. Protect Your Mission-Critical Rack EquipmentPlug your equipment into the eight NEMA 5-15/20R and one NEMA L5-30R outlets. Two 5-15/20R outlets are switchable, allowing you to power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All nine outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes. High Efficiency Operation Helps the Environment and Your Cash FlowOperating with a high 98% line-mode efficiency, this 3kVA UPS system can save BTU heat output and energy costs. Advanced Communications Ports Connect to Any Workstation or ServerUSB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include monitoring of equipment load level, self-test data and utility power conditions. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. The SMART3000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions. Multi-Function LCD and Audible Alarms Keep You InformedThe front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions.
-
General Information Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SMART3000RM2UL Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartPro Product Model: SMART3000RM2UL Product Name: SmartPro SMART3000RM2UL 3000VA Rack-mountable UPS Marketing Information: Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery This Tripp Lite SmartPro® UPS system features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery weighs 60-percent less than an equivalent lead acid battery, which reduces the overall UPS weight. 120-Volt Battery Backup Keeps Equipment Operating Through Short Power FailuresThe SMART3000RM2UL provides up to 9.5 minutes (half load) and 3.5 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase UPS system gives you enough time to save important data and perform an orderly system shutdown. With a 2250W capacity (3000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-145V without using battery power. Protect Your Mission-Critical Rack EquipmentPlug your equipment into the eight NEMA 5-15/20R and one NEMA L5-30R outlets. Two 5-15/20R outlets are switchable, allowing you to power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All nine outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes. High Efficiency Operation Helps the Environment and Your Cash FlowOperating with a high 98% line-mode efficiency, this 3kVA UPS system can save BTU heat output and energy costs. Advanced Communications Ports Connect to Any Workstation or ServerUSB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include monitoring of equipment load level, self-test data and utility power conditions. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. The SMART3000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions. Multi-Function LCD and Audible Alarms Keep You InformedThe front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions. Product Type: Line-interactive UPS Technical Information Plug/Connector Type: NEMA L5-30P Receptacle Type: - NEMA 5-15/20R
- NEMA L5-30R
Receptacle Detail: - 8 x NEMA 5-15/20R
- 1 x NEMA L5-30R
Transfer Time: 5 ms Phase: Single Phase Application/Usage: - Server
- Telecommunication
- POS Terminal
- VoIP Device
- Network Storage Device
Power Description Load Capacity: 3000 VA/2250 W Input Voltage: 120 V AC Output Voltage: - 110 V AC
- 115 V AC
- 120 V AC
Waveform Type: Pure Sine Wave Battery Information Backup/Run Time (Full Load): 3.50 Minute Hot Swappable: Yes Typical Battery Recharge Time: 1.70 Hour Physical Characteristics Height: 3.4" Width: 17.3" Depth: 19.5" Rack Height: 2U Form Factor: Rack-mountable Weight (Approximate): 50.10 lb Miscellaneous Package Contents: - SmartPro SMART3000RM2UL 3000VA Rack-mountable UPS
- USB Cable
- DB9 Cable
- EPO Cable
- Rack-mounting Hardware
- Owner's Manual
Environmentally Friendly: Yes Country of Origin: China Warranty Limited Warranty: 5 Year
Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
Product Description
Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery This Tripp Lite SmartPro® UPS system features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100-percent capacity in less than two hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery weighs 60-percent less than an equivalent lead acid battery, which reduces the overall UPS weight. 120-Volt Battery Backup Keeps Equipment Operating Through Short Power FailuresThe SMART3000RM2UL provides up to 9.5 minutes (half load) and 3.5 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase UPS system gives you enough time to save important data and perform an orderly system shutdown. With a 2250W capacity (3000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-145V without using battery power. Protect Your Mission-Critical Rack EquipmentPlug your equipment into the eight NEMA 5-15/20R and one NEMA L5-30R outlets. Two 5-15/20R outlets are switchable, allowing you to power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All nine outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes. High Efficiency Operation Helps the Environment and Your Cash FlowOperating with a high 98% line-mode efficiency, this 3kVA UPS system can save BTU heat output and energy costs. Advanced Communications Ports Connect to Any Workstation or ServerUSB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include monitoring of equipment load level, self-test data and utility power conditions. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency. The SMART3000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions. Multi-Function LCD and Audible Alarms Keep You InformedThe front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions.
- Plug/Connector Type: NEMA L5-30P
- Receptacle Type: NEMA 5-15/20R, NEMA L5-30R
- Receptacle Detail: 8 x NEMA 5-15/20R, 1 x NEMA L5-30R
- Transfer Time: 5 ms
- Phase: Single Phase
- Application/Usage: Server, Telecommunication, POS Terminal, VoIP Device, Network Storage Device
- Load Capacity: 3000 VA/2250 W
- Input Voltage: 120 V AC
- Output Voltage: 110 V AC, 115 V AC, 120 V AC
- Waveform Type: Pure Sine Wave
- Backup/Run Time (Full Load): 3.50 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 1.70 Hour
- Height: 3.4"
- Width: 17.3"
- Depth: 19.5"
- Rack Height: 2U
- Form Factor: Rack-mountable
- Weight (Approximate): 50.10 lb
- Package Contents:
SmartPro SMART3000RM2UL 3000VA Rack-mountable UPS, USB Cable, DB9 Cable, EPO Cable, Rack-mounting Hardware, Owner's Manual, - Environmentally Friendly: Yes
- Country of Origin: China
- Limited Warranty: 5 Year
|
|
|
|
|
|
|