 |
 |
 |
|
6kVA/5.4kW/120V/208V Battery Backup for IT Installations and Edge Networks This SmartOnline® rack-mount online double-conversion UPS system provides uninterrupted battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. An included stepdown transformer converts your UPS, utility or generator's 208V high-voltage input to 120V low-voltage output to allow connection of a wider range of components. Expandable Internal Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Automatic restart after power outages reduces costly on-site visits. You can also connect up to four extended battery modules (BP180RT, sold separately) for hours of extended runtime. Included Bypass Switch Isolates UPS from Connected Loads for Maintenance The manual bypass lets you remove the UPS for maintenance without disrupting power to the connected load. The bypass reroutes utility power to keep essential equipment operational while you're servicing or replacing the UPS system. Pre-Installed Network Interface Offers 24/7 Remote Access The WEBCARDLXE network interface turns the SU6000RTFMB into a managed device on your network. It enables full remote configuration and SNMP-based UPS management, including load shedding, safe shutdowns and automated alerts. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment without an on-site visit. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. NEMA Outlets Protect Your Connected Components One L6-30R, two L6-20R and 18 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to manage power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The SU6000RTFMB also supports hardwired output. Intuitive LCD Interface Keeps You Informed at a Glance The menu-driven LCD provides control settings and critical information to help diagnose any issues, including alarm and fault notifications. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment. Versatile Installation Options You can mount the SU6000RTFMB in 6U of space in an EIA-standard 19-inch rack using the included 4-post rail kit or an optional 2-post rail kit (RK2PC, sold separately, one required for each UPS, EBM or transformer). You can also adapt it for tower installation using the included support stands. The 10-foot power cord with NEMA L6-30P plug connects to a compatible AC outlet. A cable gland is included for alternate hardwire input.
-
General Information
Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SU6000RTFMB Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartOnline Product Model: SU6000RTFMB Product Name: SmartOnline SU6000RTFMB 6000VA Rack/tower UPS Marketing Information: 6kVA/5.4kW/120V/208V Battery Backup for IT Installations and Edge Networks This SmartOnline® rack-mount online double-conversion UPS system provides uninterrupted battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. An included stepdown transformer converts your UPS, utility or generator's 208V high-voltage input to 120V low-voltage output to allow connection of a wider range of components. Expandable Internal Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Automatic restart after power outages reduces costly on-site visits. You can also connect up to four extended battery modules (BP180RT, sold separately) for hours of extended runtime. Included Bypass Switch Isolates UPS from Connected Loads for Maintenance The manual bypass lets you remove the UPS for maintenance without disrupting power to the connected load. The bypass reroutes utility power to keep essential equipment operational while you're servicing or replacing the UPS system. Pre-Installed Network Interface Offers 24/7 Remote Access The WEBCARDLXE network interface turns the SU6000RTFMB into a managed device on your network. It enables full remote configuration and SNMP-based UPS management, including load shedding, safe shutdowns and automated alerts. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment without an on-site visit. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. NEMA Outlets Protect Your Connected Components One L6-30R, two L6-20R and 18 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to manage power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The SU6000RTFMB also supports hardwired output. Intuitive LCD Interface Keeps You Informed at a Glance The menu-driven LCD provides control settings and critical information to help diagnose any issues, including alarm and fault notifications. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment. Versatile Installation Options You can mount the SU6000RTFMB in 6U of space in an EIA-standard 19-inch rack using the included 4-post rail kit or an optional 2-post rail kit (RK2PC, sold separately, one required for each UPS, EBM or transformer). You can also adapt it for tower installation using the included support stands. The 10-foot power cord with NEMA L6-30P plug connects to a compatible AC outlet. A cable gland is included for alternate hardwire input. Product Type: Double Conversion Online UPS Technical Information
AVR: Yes
Plug/Connector Type: - NEMA L6-30P
- Hardwired
Receptacle Type: - NEMA L6-20R
- NEMA L6-30R
- Hardwired
- NEMA 5-20R
Receptacle Detail: - 2 x NEMA L6-20R
- 18 x NEMA 5-20R
- 1 x NEMA L6-30R
Cord Length: 10 ft
Transfer Time: 0 ns
EMI/RFI Noise Filter: Yes
Phase: Single Phase
Efficiency Detail: 98% (ECO Mode)
Application/Usage: - Mission Critical Equipment
- IT Equipment
- Network Device
Surge Suppression: Yes
Features: - Audible Alarm
- Cold Start Function
- Green Energy Saving
Power Description
Load Capacity: 6000 VA/5400 W
Input Voltage: 230 V AC
Input Current: 24.80 A
Output Voltage: - 230 V AC
- 240 V AC
- 220 V AC
- 208 V AC
- 200 V AC
- 100 V AC
- 110 V AC
- 120 V AC
Output Frequency: - 50 Hz
- 60 Hz
Waveform Type: Pure Sine Wave
Circuit Breaker: Yes
Output Power Factor: 0.9
Display & Graphics
Display: LCD
Management
Network Management: - Network Card
- DB-9 RS-232
- Dry Contact
- USB
- SNMP
Alarm: - Utility Power Failure
- Low Battery
- Overload
- Battery Fault
- Remote Shutdown
Controls/Indicators
Status Indicators: LED Indicators: 4 status-indicating LEDs Interfaces/Ports
Serial Port: Yes
USB: Yes
Battery Information
DC System Voltage: 180 V DC
Battery Characteristics: Valve-regulated
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 3 Minute
Backup/Run Time (Half Load): 8 Minute
Hot Swappable: Yes
Replaceable Battery: Yes
Environmental Conditions
Minimum Operating Temperature: 32°F (0°C)
Maximum Operating Temperature: 104°F (40°C)
Thermal Dissipation: 555.37 W
Physical Characteristics
Height: 10.2"
Width: 17.3"
Depth: 34"
Rack Height: 6U
Form Factor: Rack/Tower
Weight (Approximate): 206.50 lb
Miscellaneous
Package Contents: - SmartOnline SU6000RTFMB 6000VA Rack/tower UPS
- SUTFMR 120V Stepdown Transformer
- SUPDMBP6K Maintenance Bypass
- WEBCARDLXE Network Card
- USB Cable
- RS-232 Cable
- Tower Support Stands
- Cable Gland for Hardwire Connection
- Rack-mounting Hardware for UPS and Transformer
- Maintenance Bypass Mounting Hardware
- DB9 Serial Cables
- Quick Start Guide
Energy Star: Yes Environmentally Friendly: Yes Environmental Certification: RoHS Warranty
Limited Warranty: 2 Year Additional Warranty Information: $250,000 Ultimate Lifetime Insurance
 Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Key Features
Product Description
6kVA/5.4kW/120V/208V Battery Backup for IT Installations and Edge Networks This SmartOnline® rack-mount online double-conversion UPS system provides uninterrupted battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. An included stepdown transformer converts your UPS, utility or generator's 208V high-voltage input to 120V low-voltage output to allow connection of a wider range of components. Expandable Internal Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable valve regulated lead acid (VRLA) battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Automatic restart after power outages reduces costly on-site visits. You can also connect up to four extended battery modules (BP180RT, sold separately) for hours of extended runtime. Included Bypass Switch Isolates UPS from Connected Loads for Maintenance The manual bypass lets you remove the UPS for maintenance without disrupting power to the connected load. The bypass reroutes utility power to keep essential equipment operational while you're servicing or replacing the UPS system. Pre-Installed Network Interface Offers 24/7 Remote Access The WEBCARDLXE network interface turns the SU6000RTFMB into a managed device on your network. It enables full remote configuration and SNMP-based UPS management, including load shedding, safe shutdowns and automated alerts. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment without an on-site visit. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. NEMA Outlets Protect Your Connected Components One L6-30R, two L6-20R and 18 5-20R managed outlets provide connected equipment with pure sine wave AC output and allow you to manage power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. The SU6000RTFMB also supports hardwired output. Intuitive LCD Interface Keeps You Informed at a Glance The menu-driven LCD provides control settings and critical information to help diagnose any issues, including alarm and fault notifications. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment. Versatile Installation Options You can mount the SU6000RTFMB in 6U of space in an EIA-standard 19-inch rack using the included 4-post rail kit or an optional 2-post rail kit (RK2PC, sold separately, one required for each UPS, EBM or transformer). You can also adapt it for tower installation using the included support stands. The 10-foot power cord with NEMA L6-30P plug connects to a compatible AC outlet. A cable gland is included for alternate hardwire input.
- AVR: Yes
- Plug/Connector Type: NEMA L6-30P, Hardwired
- Receptacle Type: NEMA L6-20R, NEMA L6-30R, Hardwired, NEMA 5-20R
- Receptacle Detail: 2 x NEMA L6-20R, 18 x NEMA 5-20R, 1 x NEMA L6-30R
- Cord Length: 10 ft
- Transfer Time: 0 ns
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Efficiency Detail: 98% (ECO Mode)
- Application/Usage: Mission Critical Equipment, IT Equipment, Network Device
- Surge Suppression: Yes
- Features: Audible Alarm, Cold Start Function, Green Energy Saving
- Load Capacity: 6000 VA/5400 W
- Input Voltage: 230 V AC
- Input Current: 24.80 A
- Output Voltage: 230 V AC, 240 V AC, 220 V AC, 208 V AC, 200 V AC, 100 V AC, 110 V AC, 120 V AC
- Output Frequency: 50 Hz, 60 Hz
- Waveform Type: Pure Sine Wave
- Circuit Breaker: Yes
- Output Power Factor: 0.9
- Display: LCD
- Network Management: Network Card, DB-9 RS-232, Dry Contact, USB, SNMP
- Alarm: Utility Power Failure, Low Battery, Overload, Battery Fault, Remote Shutdown
- Status Indicators:
LED Indicators: 4 status-indicating LEDs - Serial Port: Yes
- USB: Yes
- DC System Voltage: 180 V DC
- Battery Characteristics: Valve-regulated
- Battery Chemistry: Lead Acid
- Backup/Run Time (Full Load): 3 Minute
- Backup/Run Time (Half Load): 8 Minute
- Hot Swappable: Yes
- Replaceable Battery: Yes
- Minimum Operating Temperature: 32°F (0°C)
- Maximum Operating Temperature: 104°F (40°C)
- Thermal Dissipation: 555.37 W
- Height: 10.2"
- Width: 17.3"
- Depth: 34"
- Rack Height: 6U
- Form Factor: Rack/Tower
- Weight (Approximate): 206.50 lb
- Package Contents:
SmartOnline SU6000RTFMB 6000VA Rack/tower UPS, SUTFMR 120V Stepdown Transformer, SUPDMBP6K Maintenance Bypass, WEBCARDLXE Network Card, USB Cable, RS-232 Cable, Tower Support Stands, Cable Gland for Hardwire Connection, Rack-mounting Hardware for UPS and Transformer, Maintenance Bypass Mounting Hardware, DB9 Serial Cables, Quick Start Guide, - Energy Star: Yes
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- Limited Warranty: 2 Year
- Additional Warranty Information:
$250,000 Ultimate Lifetime Insurance
|
|
|
|
|
|
|