|
|
|
|
1000VA/800W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART1000RM2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 120V battery backup with 0.8 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (400W) powered as long as 15 minutes and a full load (800W) up to 5.3 minutes. Installed WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 570 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART1000RM2UN can correct brownouts as low as 83V and overvoltages as high as 147V back to nominal 120V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 95% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it.
-
General Information Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SMART1000RM2UN Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartPro Product Model: SMART1000RM2UN Product Name: SmartPro SMART1000RM2UN 1000VA Rack-mountable UPS Marketing Information: 1000VA/800W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART1000RM2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 120V battery backup with 0.8 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (400W) powered as long as 15 minutes and a full load (800W) up to 5.3 minutes. Installed WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 570 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART1000RM2UN can correct brownouts as low as 83V and overvoltages as high as 147V back to nominal 120V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 95% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it. Product Type: Line-interactive UPS Technical Information AVR: Yes Plug/Connector Type: NEMA 5-15P Receptacle Type: NEMA 5-15R Receptacle Detail: 6 x NEMA 5-15R Number of Battery & Surge Outlets: 6 Overload Protection: Yes Transfer Time: 4 ms EMI/RFI Noise Filter: Yes Phase: Single Phase Application/Usage: - Digital Signage
- Network Equipment
- Telecommunication
- Security System
- Wiring Closet
- High-end System Component
- Gaming Console
- Retail and Wholesale
- Casino
- Hotel/Motel Management
- Electronic
Power Description Load Capacity: 1000 VA/800 W Input Voltage: 120 V AC Output Voltage: - 110 V AC
- 115 V AC
- 120 V AC
Waveform Type: Pure Sine Wave Surge Energy Rating: 570 J Management Network Management: SNMP/Telnet/SSH Alarm: - UPS StartUp
- Power Failure
- Low Battery
- Overload
- UPS Fault
- Remote Shutdown
Controls/Indicators Status Indicators: Front Panel LCD Display: - Front panel LCD information
- Configuration screen offers detailed UPS
- Site power status and operating data
- Plus configuration of voltage
- Operating mode
- Alarm function and a variety of additional options
Interfaces/Ports Serial Port: Yes EPO Port: Yes USB (HID Compliant) Port: Yes Battery Information DC System Voltage: 24 V DC Battery Characteristics: Valve-regulated Battery Chemistry: Lead Acid Backup/Run Time (Full Load): 5.30 Minute Backup/Run Time (Half Load): 15 Minute Hot Swappable: Yes Typical Battery Recharge Time: 4 Hour Replaceable Battery: Yes Environmental Conditions Storage Temperature: 5°F (-15°C) - 122°F (50°C) Maximum Operating Temperature: 104°F (40°C) Sound Emission (A-Weighted): 45 dB(A) Thermal Dissipation: 39.27 W Physical Characteristics Height: 3.5" Width: 17.4" Depth: 12.5" Rack Height: 2U Form Factor: Rack-mountable Weight (Approximate): 35.41 lb Miscellaneous Package Contents: - SmartPro SMART1000RM2UN 1000VA Rack-mountable UPS
- WEBCARDLX Network Management Card
- Micro USB to USB-A Cable
- USB Cable
- DB9 Cable
- EPO Cable
- Rack-mounting Hardware
- Owner's Manual
Energy Star: Yes Environmentally Friendly: Yes Country of Origin: China Warranty Limited Warranty: 2 Year
Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
Product Description
1000VA/800W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART1000RM2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 120V battery backup with 0.8 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (400W) powered as long as 15 minutes and a full load (800W) up to 5.3 minutes. Installed WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 570 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART1000RM2UN can correct brownouts as low as 83V and overvoltages as high as 147V back to nominal 120V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 95% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it.
- AVR: Yes
- Plug/Connector Type: NEMA 5-15P
- Receptacle Type: NEMA 5-15R
- Receptacle Detail: 6 x NEMA 5-15R
- Number of Battery & Surge Outlets: 6
- Overload Protection: Yes
- Transfer Time: 4 ms
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Application/Usage: Digital Signage, Network Equipment, Telecommunication, Security System, Wiring Closet, High-end System Component, Gaming Console, Retail and Wholesale, Casino, Hotel/Motel Management, Electronic
- Load Capacity: 1000 VA/800 W
- Input Voltage: 120 V AC
- Output Voltage: 110 V AC, 115 V AC, 120 V AC
- Waveform Type: Pure Sine Wave
- Surge Energy Rating: 570 J
- Network Management: SNMP/Telnet/SSH
- Alarm: UPS StartUp, Power Failure, Low Battery, Overload, UPS Fault, Remote Shutdown
- Status Indicators:
Front Panel LCD Display: Front panel LCD information, Configuration screen offers detailed UPS, Site power status and operating data, Plus configuration of voltage, Operating mode, Alarm function and a variety of additional options , - Serial Port: Yes
- EPO Port: Yes
- USB (HID Compliant) Port: Yes
- DC System Voltage: 24 V DC
- Battery Characteristics: Valve-regulated
- Battery Chemistry: Lead Acid
- Backup/Run Time (Full Load): 5.30 Minute
- Backup/Run Time (Half Load): 15 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 4 Hour
- Replaceable Battery: Yes
- Storage Temperature: 5°F (-15°C) - 122°F (50°C)
- Maximum Operating Temperature: 104°F (40°C)
- Sound Emission (A-Weighted): 45 dB(A)
- Thermal Dissipation: 39.27 W
- Height: 3.5"
- Width: 17.4"
- Depth: 12.5"
- Rack Height: 2U
- Form Factor: Rack-mountable
- Weight (Approximate): 35.41 lb
- Package Contents:
SmartPro SMART1000RM2UN 1000VA Rack-mountable UPS, WEBCARDLX Network Management Card, Micro USB to USB-A Cable, USB Cable, DB9 Cable, EPO Cable, Rack-mounting Hardware, Owner's Manual, - Energy Star: Yes
- Environmentally Friendly: Yes
- Country of Origin: China
- Limited Warranty: 2 Year
|
|
|
|
|
|
|