 |
 |
 |
|
1kVA/900W/230V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMX1000RT2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 230V battery backup with 0.9 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery provides 11.9 minutes of support at half load (450W) and 3.6 minutes at full load (900W), allowing you to work through short power failures and giving you enough time to safely save files and shut down your system in case of a prolonged blackout. WEBCARDLX Network Interface Offers 24/7 Remote Access for Monitoring and Control The Java-free HTML5-based WEBCARDLX enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime. WEBCARDLX allows you to use the Auto Probe feature, which can prevent costly service calls by automatically rebooting non-responsive network devices. 6 Outlets Protect Your Connected Components Six C13 outlets provide battery backup, 350 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMX1000RT2UN can correct brownouts as low as 182V and overvoltages as high as 278V back to nominal 230V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. The EPO port supports emergency shutdown in large facilities. Cables are included.
-
General Information
Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SMX1000RT2UN Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartPro Product Model: SMX1000RT2UN Product Name: SmartPro SMX1000RT2UN 1000VA Rack/Tower UPS Marketing Information: 1kVA/900W/230V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMX1000RT2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 230V battery backup with 0.9 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery provides 11.9 minutes of support at half load (450W) and 3.6 minutes at full load (900W), allowing you to work through short power failures and giving you enough time to safely save files and shut down your system in case of a prolonged blackout. WEBCARDLX Network Interface Offers 24/7 Remote Access for Monitoring and Control The Java-free HTML5-based WEBCARDLX enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime. WEBCARDLX allows you to use the Auto Probe feature, which can prevent costly service calls by automatically rebooting non-responsive network devices. 6 Outlets Protect Your Connected Components Six C13 outlets provide battery backup, 350 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMX1000RT2UN can correct brownouts as low as 182V and overvoltages as high as 278V back to nominal 230V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. The EPO port supports emergency shutdown in large facilities. Cables are included. Product Type: Line-interactive UPS Technical Information
AVR: Yes
Plug/Connector Type: IEC 60320 C14
Receptacle Type: IEC 60320 C13
Receptacle Detail: 6 x IEC 60320 C13
Overload Protection: Yes
Transfer Time: 4 ms
EMI/RFI Noise Filter: Yes
Phase: Single Phase
Energy Saving: Green Energy-Saving
Application/Usage: - Telecommunication
- Network Device
- Wiring Closet
- Gaming Console
- Digital Signage
- Retail Building
- Casino
- Mission Critical Equipment
- Server
- Hotel/Motel Management
Power Description
Load Capacity: 1000 VA/900 W
Input Voltage: 230 V AC
Output Voltage: - 220 V AC
- 230 V AC
- 240 V AC
Input Frequency: 50 Hz
Output Frequency: 60 Hz
Waveform Type: Pure Sine Wave
Surge Energy Rating: 350 J
Management
Network Management: SNMP/Telnet/SSH
Alarm: - UPS StartUp
- Power Failure
- Low Battery
- Overload
- UPS Fault
- Remote Shutdown
Controls/Indicators
Status Indicators: Front Panel LCD Information And Configuration Screen: - UPS and Site Power Status
- Operating Data
- Plus Configuration Of Voltage
- Frequency
- Operating Mode
- Alarm Function and A Variety Of Additional Options
Interfaces/Ports
Serial Port: Yes
EPO Port: Yes
USB (HID Compliant) Port: Yes
Battery Information
DC System Voltage: 24 V DC
Backup/Run Time (Full Load): 3.60 Minute
Backup/Run Time (Half Load): 11.90 Minute
Hot Swappable: Yes
Typical Battery Recharge Time: 4.50 Hour
Replaceable Battery: Yes
Environmental Conditions
Environmental Sensors: - Temperature Sensor
- Humidity Sensor
Storage Temperature: 5°F (-15°C) - 122°F (50°C)
Maximum Operating Temperature: 104°F (40°C)
Sound Emission (A-Weighted): 45 dB(A)
Thermal Dissipation: 29.31 W
Physical Characteristics
Height: 3.5"
Width: 17.5"
Depth: 13.5"
Rack Height: 2U
Form Factor: Rack/Tower
Weight (Approximate): 34 lb
Miscellaneous
Package Contents: - SmartPro SMX1000RT2UN 1000VA Rack/Tower UPS
- WEBCARDLX Network Management Card
- USB Cable
- DB9 Cable
- EPO Cable
- 2 x C13-to-C14 AC Power Cords
- Rack-mounting Hardware
- Owner's Manual
Environmentally Friendly: Yes Country of Origin: China Warranty
Limited Warranty: 2 Year
 Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Key Features
Product Description
1kVA/900W/230V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMX1000RT2UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The six-outlet 230V battery backup with 0.9 power factor is ideal protection for small networks, wiring closets, security systems, telecom, high-end PC gaming, digital signage equipment and other professional applications, including retail, casino and hotel/motel management. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery provides 11.9 minutes of support at half load (450W) and 3.6 minutes at full load (900W), allowing you to work through short power failures and giving you enough time to safely save files and shut down your system in case of a prolonged blackout. WEBCARDLX Network Interface Offers 24/7 Remote Access for Monitoring and Control The Java-free HTML5-based WEBCARDLX enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime. WEBCARDLX allows you to use the Auto Probe feature, which can prevent costly service calls by automatically rebooting non-responsive network devices. 6 Outlets Protect Your Connected Components Six C13 outlets provide battery backup, 350 joules of surge protection and voltage regulation for your crucial components. Two independently switched two-outlet load banks enable both scheduled and real-time remote rebooting and load shedding. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMX1000RT2UN can correct brownouts as low as 182V and overvoltages as high as 278V back to nominal 230V power continuously, all while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 97% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. Silenceable Alarm and Easy-to-Read LCD Keep You Informed Around the Clock The front-panel LCD lets you monitor important data, such as load level, power factor, voltage, battery charge and estimated runtimes. It rotates for comfortable viewing in both rack and tower configurations. The audible alarm sounds for power failure, low battery and overloads. You may silence it using the built-in switch or disable it. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. The EPO port supports emergency shutdown in large facilities. Cables are included.
- AVR: Yes
- Plug/Connector Type: IEC 60320 C14
- Receptacle Type: IEC 60320 C13
- Receptacle Detail: 6 x IEC 60320 C13
- Overload Protection: Yes
- Transfer Time: 4 ms
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Energy Saving: Green Energy-Saving
- Application/Usage: Telecommunication, Network Device, Wiring Closet, Gaming Console, Digital Signage, Retail Building, Casino, Mission Critical Equipment, Server, Hotel/Motel Management
- Load Capacity: 1000 VA/900 W
- Input Voltage: 230 V AC
- Output Voltage: 220 V AC, 230 V AC, 240 V AC
- Input Frequency: 50 Hz
- Output Frequency: 60 Hz
- Waveform Type: Pure Sine Wave
- Surge Energy Rating: 350 J
- Network Management: SNMP/Telnet/SSH
- Alarm: UPS StartUp, Power Failure, Low Battery, Overload, UPS Fault, Remote Shutdown
- Status Indicators:
Front Panel LCD Information And Configuration Screen: UPS and Site Power Status, Operating Data, Plus Configuration Of Voltage, Frequency, Operating Mode, Alarm Function and A Variety Of Additional Options, - Serial Port: Yes
- EPO Port: Yes
- USB (HID Compliant) Port: Yes
- DC System Voltage: 24 V DC
- Backup/Run Time (Full Load): 3.60 Minute
- Backup/Run Time (Half Load): 11.90 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 4.50 Hour
- Replaceable Battery: Yes
- Environmental Sensors: Temperature Sensor, Humidity Sensor
- Storage Temperature: 5°F (-15°C) - 122°F (50°C)
- Maximum Operating Temperature: 104°F (40°C)
- Sound Emission (A-Weighted): 45 dB(A)
- Thermal Dissipation: 29.31 W
- Height: 3.5"
- Width: 17.5"
- Depth: 13.5"
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 34 lb
- Package Contents:
SmartPro SMX1000RT2UN 1000VA Rack/Tower UPS, WEBCARDLX Network Management Card, USB Cable, DB9 Cable, EPO Cable, 2 x C13-to-C14 AC Power Cords, Rack-mounting Hardware, Owner's Manual, - Environmentally Friendly: Yes
- Country of Origin: China
- Limited Warranty: 2 Year
|
|
|
|
|
|
|