|
|
|
|
500VA/300W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART500RT1UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The seven-outlet 120V battery backup is ideal protection for rack-mount equipment in your server room or network closet. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes. Included WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 567 joules of surge protection and voltage regulation for your crucial components. Five are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART500RT1UN maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The internal batteries are field-replaceable and hot-swappable. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 96% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. LED Indicators and Audible Alarms Keep You Informed Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.
-
General Information Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SMART500RT1UN Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartPro Product Model: SMART500RT1UN Product Name: SmartPro SMART500RT1UN 500VA Rack/Tower UPS Marketing Information: 500VA/300W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART500RT1UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The seven-outlet 120V battery backup is ideal protection for rack-mount equipment in your server room or network closet. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes. Included WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 567 joules of surge protection and voltage regulation for your crucial components. Five are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART500RT1UN maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The internal batteries are field-replaceable and hot-swappable. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 96% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. LED Indicators and Audible Alarms Keep You Informed Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions. Product Type: Line-interactive UPS Technical Information AVR: Yes Plug/Connector Type: NEMA 5-15P Receptacle Type: NEMA 5-15R Receptacle Detail: 6 x NEMA 5-15R Number of Surge-only Outlets: 1 Overload Protection: Yes Transfer Time: 4 ms EMI/RFI Noise Filter: Yes Phase: Single Phase Application/Usage: - Telecommunication
- Security System
- Digital Signage
- Network Closet
- Server Room
- Electronic
- Mission Critical Equipment
- Business
- POS Terminal
- VoIP
- Desktop Computer
Power Description Load Capacity: 500 VA/300 W Input Voltage: 120 V AC Output Voltage: - 120 V AC
- 110 V AC
- 115 V AC
Waveform Type: Sine Wave Surge Energy Rating: 567 J Management Network Management: SNMP/Telnet/SSH Alarm: - Power Failure
- Overload
- Low Battery
Controls/Indicators Status Indicators: LED Indicators: - 5 LEDs Indicate Line Power
- Battery Power
- Overload
- Voltage Regulation
- Battery Low/Replace Status
Interfaces/Ports Serial Port: Yes EPO Port: Yes USB (HID Compliant) Port: Yes Battery Information DC System Voltage: 12 V DC Backup/Run Time (Full Load): 3 Minute Backup/Run Time (Half Load): 14 Minute Hot Swappable: Yes Typical Battery Recharge Time: 14.40 Hour Replaceable Battery: Yes Environmental Conditions Storage Temperature: 5°F (-15°C) - 122°F (50°C) Maximum Operating Temperature: 104°F (40°C) Thermal Dissipation: 12.90 W Physical Characteristics Height: 1.7" Width: 17.3" Depth: 11.3" Rack Height: 1U Form Factor: Rack/Tower Weight (Approximate): 17.60 lb Miscellaneous Package Contents: - SmartPro SMART500RT1UN 500VA Rack/Tower UPS
- WEBCARDLX Network Management Card
- Micro USB to USB-A
- USB Cable
- DB9 Cable
- EPO Cable
- Rack-Mounting Hardware
- Owner's Manual
Environmentally Friendly: Yes Country of Origin: China Warranty Limited Warranty: 2 Year
Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
Product Description
500VA/300W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART500RT1UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The seven-outlet 120V battery backup is ideal protection for rack-mount equipment in your server room or network closet. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes. Included WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 6 NEMA Outlets Protect Your Connected Components Six 5-15R outlets provide battery backup, 567 joules of surge protection and voltage regulation for your crucial components. Five are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART500RT1UN maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The internal batteries are field-replaceable and hot-swappable. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 96% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. LED Indicators and Audible Alarms Keep You Informed Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions.
- AVR: Yes
- Plug/Connector Type: NEMA 5-15P
- Receptacle Type: NEMA 5-15R
- Receptacle Detail: 6 x NEMA 5-15R
- Number of Surge-only Outlets: 1
- Overload Protection: Yes
- Transfer Time: 4 ms
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Application/Usage: Telecommunication, Security System, Digital Signage, Network Closet, Server Room, Electronic, Mission Critical Equipment, Business, POS Terminal, VoIP, Desktop Computer
- Load Capacity: 500 VA/300 W
- Input Voltage: 120 V AC
- Output Voltage: 120 V AC, 110 V AC, 115 V AC
- Waveform Type: Sine Wave
- Surge Energy Rating: 567 J
- Network Management: SNMP/Telnet/SSH
- Alarm: Power Failure, Overload, Low Battery
- Status Indicators:
LED Indicators: 5 LEDs Indicate Line Power, Battery Power, Overload, Voltage Regulation, Battery Low/Replace Status, - Serial Port: Yes
- EPO Port: Yes
- USB (HID Compliant) Port: Yes
- DC System Voltage: 12 V DC
- Backup/Run Time (Full Load): 3 Minute
- Backup/Run Time (Half Load): 14 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 14.40 Hour
- Replaceable Battery: Yes
- Storage Temperature: 5°F (-15°C) - 122°F (50°C)
- Maximum Operating Temperature: 104°F (40°C)
- Thermal Dissipation: 12.90 W
- Height: 1.7"
- Width: 17.3"
- Depth: 11.3"
- Rack Height: 1U
- Form Factor: Rack/Tower
- Weight (Approximate): 17.60 lb
- Package Contents:
SmartPro SMART500RT1UN 500VA Rack/Tower UPS, WEBCARDLX Network Management Card, Micro USB to USB-A, USB Cable, DB9 Cable, EPO Cable, Rack-Mounting Hardware, Owner's Manual, - Environmentally Friendly: Yes
- Country of Origin: China
- Limited Warranty: 2 Year
|
|
|
|
|
|
|