Home > Hardware > Networking > Tranceiver Modules >

N784-H01-SCSM Tripp Lite Hardened Copper to Fiber Media Converter RJ45/SC SMF 10/100Mbps

N784-H01-SCSM


 

Not in immediate stock. Direct ship from manufacturer, long lead times may apply due to material shortages

Your Price: $143.67

Mfg. Part:: N784-H01-SCSM
quantity:

Overview Technical Specifications Why Choose Us to Buy
 

Features | Extends a Network Connection up to 30 km over SC Singlemode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions

Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions

Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards

The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis

House and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases

The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Network & Communication
Ethernet Technology: Fast Ethernet
Network Technology:
  • 10/100Base-TX
  • 100Base-FX
  • Power Description
    Power Source: AC Adapter
    Power Consumption: 1.80 W
    Plug/Connector Type: NEMA 1-15P
    Physical Characteristics
    Form Factor:
  • Wall Mountable
  • DIN Rail Mountable
  • Desktop
  • Height: 0.9"
    Width: 2.9"
    Depth: 4.3"
    Weight (Approximate): 8.43 oz
    Miscellaneous
    Package Contents:
    • N784-H01-SCSM Transceiver/Media Converter
    • L-shaped Bracket
    • Rubber Foot
    • SC Connector Cap
    • External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A)
    • DIN Rail Kit
    • Wall-mounting Hardware
    • Quick Start Guide

    Environmentally Friendly: Yes
    Environmental Certification:
  • RoHS
  • WEEE
  • Country of Origin: Taiwan
    TAA Compliant: Yes
    Warranty
    Limited Warranty: 2 Year
    Key Features


    • Product Description

      Features | Extends a Network Connection up to 30 km over SC Singlemode Fiber Optic Cable

      This network media converter converts a copper Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 30 kilometers (18.6 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCSM with singlemode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

      Monitor Your Installation with Link Fault Signaling and Loop Back Functions

      Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

      LEDs Indicate Installation Performance and Diagnostic Functions

      Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

      Protective Metal Housing Built to Withstand a Variety of Hazards

      The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

      Works in Tandem with Tripp Lite's N785-CH12 Chassis

      House and power up to 12 Tripp Lite media converters, including the N784-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

      TAA-Compliant for GSA Schedule Purchases

      The N784-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


    • Total Number of Ports: 2
    • Network (RJ-45): Yes
    • Number of Network (RJ-45) Ports: 1
    • Number of SC Ports: 1
    • SC Port Type: Duplex
    • Media Type Supported: Twisted Pair, Optical Fiber
    • Fiber Mode Supported: Single-mode
    • Fiber Optic Wavelength: 1310 nm
    • Maximum Distance Supported: 18.64 Mile
    • Ethernet Technology: Fast Ethernet
    • Network Technology: 10/100Base-TX, 100Base-FX
    • Power Source: AC Adapter
    • Power Consumption: 1.80 W
    • Plug/Connector Type: NEMA 1-15P
    • Form Factor: Wall Mountable, DIN Rail Mountable, Desktop
    • Height: 0.9"
    • Width: 2.9"
    • Depth: 4.3"
    • Weight (Approximate): 8.43 oz
    • Package Contents:
        N784-H01-SCSM Transceiver/Media Converter, L-shaped Bracket, Rubber Foot, SC Connector Cap, External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A), DIN Rail Kit, Wall-mounting Hardware, Quick Start Guide,
    • Environmentally Friendly: Yes
    • Environmental Certification: RoHS, WEEE
    • Country of Origin: Taiwan
    • TAA Compliant: Yes
    • Limited Warranty: 2 Year

    Share your knowledge of this product with other customers... Write a review

    Browse for more products in the same category as this item:

    Hardware > Networking > Tranceiver Modules
    Hardware > Networking
    Industries > Government
    Brands > Tripp Lite