Home > Hardware > Networking > Tranceiver Modules >

N785-H01-SFP Tripp Lite by Eaton Hardened Gigabit Fiber to Ethernet Media Converter 10/100/1000 Mbps RJ45/SFP -10° to 60°C

N785-H01-SFP


 

Not in immediate stock. Direct ship from manufacturer, long lead times may apply due to material shortages

Your Price: $109.03


Mfg. Part:: N785-H01-SFP
quantity:

Overview Technical Specifications Why Choose Us to Buy
 

Features | Customize a Network Extension over Fiber Optic Cable
This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling's 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SFP, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N785-H01-SFP is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

I/O Expansions
Number of Total Expansion Slots: 1
Expansion Slot Type: SFP (mini-GBIC)
Number of SFP Slots: 1
Network & Communication
Ethernet Technology: Gigabit Ethernet
Network Technology:
  • 10/100/1000Base-T
  • 100/1000Base-X
  • Power Description
    Power Source: AC Adapter
    Power Consumption: 1.80 W
    Plug/Connector Type: NEMA 5-15P
    Physical Characteristics
    Form Factor:
  • DIN Rail Mountable
  • Wall Mountable
  • Desktop
  • Height: 0.9"
    Width: 2.9"
    Depth: 4.3"
    Weight (Approximate): 8.43 oz
    Miscellaneous
    Package Contents:
    • N785-H01-SFP Transceiver/Media Converter
    • L-shaped Bracket
    • Rubber Foot
    • SFP Connector Cap
    • External Power Supply with NEMA 1-15P Plug
    • DIN Rail Kit
    • Wall-mounting Hardware
    • Quick Start Guide

    Environmentally Friendly: Yes
    Country of Origin: Taiwan
    TAA Compliant: Yes
    Warranty
    Limited Warranty: 2 Year
    Key Features


    • Product Description

      Features | Customize a Network Extension over Fiber Optic Cable
      This network media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling's 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

      Monitor Your Installation with Link Fault Signaling and Loop Back Functions
      Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

      LEDs Indicate Installation Performance and Diagnostic Functions
      Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

      Protective Metal Housing Built to Withstand a Variety of Hazards
      The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

      Works in Tandem with Tripp Lite's N785-CH12 Chassis
      House and power up to 12 Tripp Lite media converters, including the N785-H01-SFP, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

      TAA-Compliant for GSA Schedule Purchases
      The N785-H01-SFP is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


    • Total Number of Ports: 1
    • Network (RJ-45): Yes
    • Number of Network (RJ-45) Ports: 1
    • Media Type Supported: Twisted Pair, Optical Fiber
    • Fiber Mode Supported: Multi-mode, Single-mode
    • Maximum Distance Supported: 328.08 ft
    • Number of Total Expansion Slots: 1
    • Expansion Slot Type: SFP (mini-GBIC)
    • Number of SFP Slots: 1
    • Ethernet Technology: Gigabit Ethernet
    • Network Technology: 10/100/1000Base-T, 100/1000Base-X
    • Power Source: AC Adapter
    • Power Consumption: 1.80 W
    • Plug/Connector Type: NEMA 5-15P
    • Form Factor: DIN Rail Mountable, Wall Mountable, Desktop
    • Height: 0.9"
    • Width: 2.9"
    • Depth: 4.3"
    • Weight (Approximate): 8.43 oz
    • Package Contents:
        N785-H01-SFP Transceiver/Media Converter, L-shaped Bracket, Rubber Foot, SFP Connector Cap, External Power Supply with NEMA 1-15P Plug, DIN Rail Kit, Wall-mounting Hardware, Quick Start Guide,
    • Environmentally Friendly: Yes
    • Country of Origin: Taiwan
    • TAA Compliant: Yes
    • Limited Warranty: 2 Year

    Share your knowledge of this product with other customers... Write a review

    Browse for more products in the same category as this item:

    Hardware > Networking > Tranceiver Modules
    Hardware > Networking
    Industries > Government
    Featured Brands > Tripp Lite