Home > Hardware > Networking > Patch Panels >

N482TAP-4SM73LC Tripp Lite Fiber TAP Cassette - Singlemode, 4x Duplex LC, 70/30 Split

N482TAP-4SM73LC


 

Not in immediate stock. Direct ship from manufacturer, long lead times may apply due to material shortages

Your Price: $457.70

Mfg. Part:: N482TAP-4SM73LC
quantity:

Overview Technical Specifications Why Choose Us to Buy
 

Helps you gather data to analyze performance issues, optimize network traffic and monitor a fiber network for security threats.

Features |
Fiber Optic TAP Cassette Helps You Monitor and Analyze Network Data

This Tripp Lite N482TAP-4SM73LC singlemode TAP (traffic access point) cassette is a passive device added to a fiber optic network to enable real-time monitoring. Its optical splitter divides the optical signal into two outputs, one for the downstream device and one for monitoring, without introducing latency or creating a single point of failure.

Creates a 70/30 Split Ratio for User Traffic and Signal Monitoring

Network monitoring is used to gather data to analyze performance issues, optimize network traffic and uncover security threats in your data center, telecom carrier network or R&D facility. This TAP cassette directs 30 percent of the light to a nearby monitoring device. The remaining 70 percent is transmitted as usual throughout the network without affecting performance.

Compatible with Tripp Lite Singlemode Cabling

This passive TAP cassette supports 40/100 Gb internally using singlemode fiber optic cable, enabling you to perform monitoring and data analysis without causing delays or affecting network performance. It is compatible with recommended Tripp Lite cables, including the N370-Series, for connecting to switches, routers and monitoring equipment.

Easy to Install with Compatible Enclosures

The singlemode N482TAP-4SM73LC works with Tripp Lite's N482-00U (fits one cassette), N482-01U (fits five cassettes), N482-02U (14 cassettes) and N482-04U (28 cassettes) chassis. The futureproof-friendly modular design allows you to remove the cassette without replacing the panel or removing other cassettes. The TAP cassette also complies with IEEE 802.3ae (10 Gb) and ANSI T11.2 (Fibre Channel) requirements. A 0.20 dB maximum insertion loss falls under IEEE 802.3ae maximum channel loss spec of <25 dB.

Factory-Terminated Ports Help Reduce Installation Time

The OM4-rated cassette has 12 Duplex LC ports that allow fast, easy connection of cables. The durable plastic cassette comes with dust caps to protect unused ports.

Warranty
Limited Warranty: Lifetime
Key Features


  • Product Description

    Helps you gather data to analyze performance issues, optimize network traffic and monitor a fiber network for security threats.

    Features |
    Fiber Optic TAP Cassette Helps You Monitor and Analyze Network Data

    This Tripp Lite N482TAP-4SM73LC singlemode TAP (traffic access point) cassette is a passive device added to a fiber optic network to enable real-time monitoring. Its optical splitter divides the optical signal into two outputs, one for the downstream device and one for monitoring, without introducing latency or creating a single point of failure.

    Creates a 70/30 Split Ratio for User Traffic and Signal Monitoring

    Network monitoring is used to gather data to analyze performance issues, optimize network traffic and uncover security threats in your data center, telecom carrier network or R&D facility. This TAP cassette directs 30 percent of the light to a nearby monitoring device. The remaining 70 percent is transmitted as usual throughout the network without affecting performance.

    Compatible with Tripp Lite Singlemode Cabling

    This passive TAP cassette supports 40/100 Gb internally using singlemode fiber optic cable, enabling you to perform monitoring and data analysis without causing delays or affecting network performance. It is compatible with recommended Tripp Lite cables, including the N370-Series, for connecting to switches, routers and monitoring equipment.

    Easy to Install with Compatible Enclosures

    The singlemode N482TAP-4SM73LC works with Tripp Lite's N482-00U (fits one cassette), N482-01U (fits five cassettes), N482-02U (14 cassettes) and N482-04U (28 cassettes) chassis. The futureproof-friendly modular design allows you to remove the cassette without replacing the panel or removing other cassettes. The TAP cassette also complies with IEEE 802.3ae (10 Gb) and ANSI T11.2 (Fibre Channel) requirements. A 0.20 dB maximum insertion loss falls under IEEE 802.3ae maximum channel loss spec of <25 dB.

    Factory-Terminated Ports Help Reduce Installation Time

    The OM4-rated cassette has 12 Duplex LC ports that allow fast, easy connection of cables. The durable plastic cassette comes with dust caps to protect unused ports.


  • Total Number of Ports: 12
  • Number of LC Ports: 12
  • LC Port Type: Duplex
  • Height: 4.7"
  • Width: 3.5"
  • Depth: 1.2"
  • Package Contents:
      N482TAP-4SM73LC Singlemode TAP Cassette, 70/30, Quick Start Guide,
  • Environmentally Friendly: Yes
  • Environmental Certification: RoHS, REACH
  • Limited Warranty: Lifetime

Share your knowledge of this product with other customers... Write a review

Browse for more products in the same category as this item:

Hardware > Networking > Patch Panels
Brands > Tripp Lite