|
|
|
|
The Cisco RF Gateway 1 is a standards-based universal edge QAM (U-EQAM) solution for convergence of high-speed and high-bandwidth data and video distribution at the edge of the cable access network. The Cisco RF Gateway 1 offers leading edge density, modularity, and flexibility with support for Switched Digital Video (SDV), VoD, Broadcast Video, and DOCSIS®3.0/Modular CMTS (M-CMTS)™all on a single QAM platform. The Cisco RF Gateway 1 provides higher density (up to 96 QAMs per RU), improved reliability, superior RF performance, 1 GHz RF output, and DOCSIS 3.0/M-CMTS capability. It is fully integrated and tested as part of the Cisco Digital Broadband Delivery System (DBDS) and the Cisco uBR10012 M-CMTS solution, accelerating the deployment and easing the management of digital video and DOCSIS services. The Cisco RF Gateway 1 enables the converged next-generation cable access network by offering comprehensive video and DOCSIS functions in a single U-EQAM platform. Applications - SDV
- VoD (and other unicast services)
- Broadcast Video
- High Definition or Standard Definition Content
- DOCSIS 3.0 / M-CMTS Architecture
- 1 GHz Expansion
Features and Benefits Primary Benefits The compact Cisco RF Gateway 1 provides the following benefits for cable operators: - Rapid time-to-market of QAM-based services to generate incremental revenue through a modular, flexible design based on a proven, fourth-generation QAM architecture
- Efficient use of capital expenditures through maximum spectrum efficiency (SDV, QAM Sharing, 1 GHz) and U-EQAM functionality (video and data) for flexibility and optimization in a variety of video and data network architectures
- Quality and reliability through a redundant architecture; full testing and integration with the Cisco DBDS Video Delivery System and the Cisco uBR10012 M-CMTS Architecture
Primary Features The Cisco RF Gateway 1 provides up to 96 U-EQAM channels (for SDV, Broadcast, VoD, and DOCSIS 3.0/M-CMTS) in a compact 1 RU chassis. The modular design supports 16 QAM channels per module, with eight QAM channels per RF output port and frequency agility up to 1 GHz. Primary features include: - True U-EQAM video (broadcast, SDV, SD/HD, MPEG-2, AVC) and high speed data
- (M-CMTS/DTI, DOCSIS 3.0) in 1 RU form factor
- Manual or DEPI Control Plane modes supported
- Table-based or session-based video functionality
- Optional on-board Encryption: DVB®SimulCrypt and PowerKEY®SKS
- Utilizes Direct Digital Synthesis (DDS) QAM technology which allows superior RF performance and stability
- 96 configurable QAM channels; each of which is fully agile 45-1000 MHz
- RF performance typically meets or exceeds CableLabs®DRFI specification CM-SP-DRFI
- Modular, hot-swappable, and Auto-configurable QAM cards
- Support for up to 2048 streams in 1 RU
- Fully redundant design with redundant Gigabit Ethernet ports and power supplies (AC/AC, AC/DC, or DC/DC)
- Front-to-back airflow to allow self-cooling and stacking
- Compliance with ITU-T J.83 standard, Annex A (DVB), Annex B (ATSC), or Annex C (Japan)
- Internet Group Management Protocol Version 3 (IGMPv3) support
- Low power consumption per QAM
- Four or eight QAM channels per RF port available - independent of channel bandwidth (6, 7, and 8 MHz)
- Fully SNMP compliant
-
General Information Manufacturer: Cisco Systems, Inc Manufacturer Part Number: RFGW1 Manufacturer Website Address: http://www.cisco.com Brand Name: Cisco Product Name: RF Gateway 1 Marketing Information: The Cisco RF Gateway 1 is a standards-based universal edge QAM (U-EQAM) solution for convergence of high-speed and high-bandwidth data and video distribution at the edge of the cable access network. The Cisco RF Gateway 1 offers leading edge density, modularity, and flexibility with support for Switched Digital Video (SDV), VoD, Broadcast Video, and DOCSIS®3.0/Modular CMTS (M-CMTS)™all on a single QAM platform. The Cisco RF Gateway 1 provides higher density (up to 96 QAMs per RU), improved reliability, superior RF performance, 1 GHz RF output, and DOCSIS 3.0/M-CMTS capability. It is fully integrated and tested as part of the Cisco Digital Broadband Delivery System (DBDS) and the Cisco uBR10012 M-CMTS solution, accelerating the deployment and easing the management of digital video and DOCSIS services. The Cisco RF Gateway 1 enables the converged next-generation cable access network by offering comprehensive video and DOCSIS functions in a single U-EQAM platform. Applications - SDV
- VoD (and other unicast services)
- Broadcast Video
- High Definition or Standard Definition Content
- DOCSIS 3.0 / M-CMTS Architecture
- 1 GHz Expansion
Features and Benefits Primary Benefits The compact Cisco RF Gateway 1 provides the following benefits for cable operators: - Rapid time-to-market of QAM-based services to generate incremental revenue through a modular, flexible design based on a proven, fourth-generation QAM architecture
- Efficient use of capital expenditures through maximum spectrum efficiency (SDV, QAM Sharing, 1 GHz) and U-EQAM functionality (video and data) for flexibility and optimization in a variety of video and data network architectures
- Quality and reliability through a redundant architecture; full testing and integration with the Cisco DBDS Video Delivery System and the Cisco uBR10012 M-CMTS Architecture
Primary Features The Cisco RF Gateway 1 provides up to 96 U-EQAM channels (for SDV, Broadcast, VoD, and DOCSIS 3.0/M-CMTS) in a compact 1 RU chassis. The modular design supports 16 QAM channels per module, with eight QAM channels per RF output port and frequency agility up to 1 GHz. Primary features include: - True U-EQAM video (broadcast, SDV, SD/HD, MPEG-2, AVC) and high speed data
- (M-CMTS/DTI, DOCSIS 3.0) in 1 RU form factor
- Manual or DEPI Control Plane modes supported
- Table-based or session-based video functionality
- Optional on-board Encryption: DVB®SimulCrypt and PowerKEY®SKS
- Utilizes Direct Digital Synthesis (DDS) QAM technology which allows superior RF performance and stability
- 96 configurable QAM channels; each of which is fully agile 45-1000 MHz
- RF performance typically meets or exceeds CableLabs®DRFI specification CM-SP-DRFI
- Modular, hot-swappable, and Auto-configurable QAM cards
- Support for up to 2048 streams in 1 RU
- Fully redundant design with redundant Gigabit Ethernet ports and power supplies (AC/AC, AC/DC, or DC/DC)
- Front-to-back airflow to allow self-cooling and stacking
- Compliance with ITU-T J.83 standard, Annex A (DVB), Annex B (ATSC), or Annex C (Japan)
- Internet Group Management Protocol Version 3 (IGMPv3) support
- Low power consumption per QAM
- Four or eight QAM channels per RF port available - independent of channel bandwidth (6, 7, and 8 MHz)
- Fully SNMP compliant
Product Type: Router Chassis Interfaces/Ports Total Number of Ports: 2 Management Port: Yes Number of Network (RJ-45) Ports: 2 I/O Expansions Number of Total Expansion Slots: 4 Expansion Slot Type: SFP Network & Communication Ethernet Technology: Fast Ethernet Network Technology: 100Base-T Networking Standards: - IEEE 802.3z
- IEEE 802.3ab
Power Description Redundant Power Supply Supported: Yes Physical Characteristics Compatible Rack Unit: 1U Form Factor: Rack-mountable Height: 1.8" Width: 19" Depth: 21" Weight (Approximate): 27.50 lb Warranty Limited Warranty: 1 Year
Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
Product Description
The Cisco RF Gateway 1 is a standards-based universal edge QAM (U-EQAM) solution for convergence of high-speed and high-bandwidth data and video distribution at the edge of the cable access network. The Cisco RF Gateway 1 offers leading edge density, modularity, and flexibility with support for Switched Digital Video (SDV), VoD, Broadcast Video, and DOCSIS®3.0/Modular CMTS (M-CMTS)™all on a single QAM platform. The Cisco RF Gateway 1 provides higher density (up to 96 QAMs per RU), improved reliability, superior RF performance, 1 GHz RF output, and DOCSIS 3.0/M-CMTS capability. It is fully integrated and tested as part of the Cisco Digital Broadband Delivery System (DBDS) and the Cisco uBR10012 M-CMTS solution, accelerating the deployment and easing the management of digital video and DOCSIS services. The Cisco RF Gateway 1 enables the converged next-generation cable access network by offering comprehensive video and DOCSIS functions in a single U-EQAM platform. Applications - SDV
- VoD (and other unicast services)
- Broadcast Video
- High Definition or Standard Definition Content
- DOCSIS 3.0 / M-CMTS Architecture
- 1 GHz Expansion
Features and Benefits Primary Benefits The compact Cisco RF Gateway 1 provides the following benefits for cable operators: - Rapid time-to-market of QAM-based services to generate incremental revenue through a modular, flexible design based on a proven, fourth-generation QAM architecture
- Efficient use of capital expenditures through maximum spectrum efficiency (SDV, QAM Sharing, 1 GHz) and U-EQAM functionality (video and data) for flexibility and optimization in a variety of video and data network architectures
- Quality and reliability through a redundant architecture; full testing and integration with the Cisco DBDS Video Delivery System and the Cisco uBR10012 M-CMTS Architecture
Primary Features The Cisco RF Gateway 1 provides up to 96 U-EQAM channels (for SDV, Broadcast, VoD, and DOCSIS 3.0/M-CMTS) in a compact 1 RU chassis. The modular design supports 16 QAM channels per module, with eight QAM channels per RF output port and frequency agility up to 1 GHz. Primary features include: - True U-EQAM video (broadcast, SDV, SD/HD, MPEG-2, AVC) and high speed data
- (M-CMTS/DTI, DOCSIS 3.0) in 1 RU form factor
- Manual or DEPI Control Plane modes supported
- Table-based or session-based video functionality
- Optional on-board Encryption: DVB®SimulCrypt and PowerKEY®SKS
- Utilizes Direct Digital Synthesis (DDS) QAM technology which allows superior RF performance and stability
- 96 configurable QAM channels; each of which is fully agile 45-1000 MHz
- RF performance typically meets or exceeds CableLabs®DRFI specification CM-SP-DRFI
- Modular, hot-swappable, and Auto-configurable QAM cards
- Support for up to 2048 streams in 1 RU
- Fully redundant design with redundant Gigabit Ethernet ports and power supplies (AC/AC, AC/DC, or DC/DC)
- Front-to-back airflow to allow self-cooling and stacking
- Compliance with ITU-T J.83 standard, Annex A (DVB), Annex B (ATSC), or Annex C (Japan)
- Internet Group Management Protocol Version 3 (IGMPv3) support
- Low power consumption per QAM
- Four or eight QAM channels per RF port available - independent of channel bandwidth (6, 7, and 8 MHz)
- Fully SNMP compliant
- Total Number of Ports: 2
- Management Port: Yes
- Number of Network (RJ-45) Ports: 2
- Number of Total Expansion Slots: 4
- Expansion Slot Type: SFP
- Ethernet Technology: Fast Ethernet
- Network Technology: 100Base-T
- Networking Standards: IEEE 802.3z, IEEE 802.3ab
- Redundant Power Supply Supported: Yes
- Compatible Rack Unit: 1U
- Form Factor: Rack-mountable
- Height: 1.8"
- Width: 19"
- Depth: 21"
- Weight (Approximate): 27.50 lb
- Limited Warranty: 1 Year
|
|
|
|
|
|
|