 |
 |
 |
|
Product Overview Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access, the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths, bonding of multiple pairs (4-wire, m-pair, inverse multiplexing over EFM bonding) is supported. In EFM mode, the multimode G.SHDSL NIM allows bonding, as defined by IEEE 802.3ah, and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service, the maximum data rate is 61.4 Mbps, with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard, which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.). In ATM mode, the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode, the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.) The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL), Single-line DSL (SDSL), T1, E1, and services beyond E1. The multimode four-pair G.SHDSL NIM, together with the ISR 4000 series router, provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).
-
General Information
Manufacturer: Cisco Systems, Inc Manufacturer Part Number: NIM-4SHDSL-EA= Manufacturer Website Address: http://www.cisco.com Brand Name: Cisco Product Name: Multimode G.SHDSL Network Interface Module Marketing Information: Product Overview Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access, the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths, bonding of multiple pairs (4-wire, m-pair, inverse multiplexing over EFM bonding) is supported. In EFM mode, the multimode G.SHDSL NIM allows bonding, as defined by IEEE 802.3ah, and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service, the maximum data rate is 61.4 Mbps, with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard, which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.). In ATM mode, the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode, the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.) The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL), Single-line DSL (SDSL), T1, E1, and services beyond E1. The multimode four-pair G.SHDSL NIM, together with the ISR 4000 series router, provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs). Product Type: Interface Module Technical Information
Application/Usage: Data Networking
Interfaces/Ports
Total Number of Ports: 1
Connector Type: RJ-45
Interfaces/Ports Details: 1 x RJ-45 G.SHDSL Ethernet
Media & Performance
Media Type Supported: Twisted Pair
Ethernet Technology: Ethernet
Network Technology: G.SHDSL
Maximum Data Transfer Rate: 15 Mbit/s
Miscellaneous
Compatibility: Cisco 4000 Series Integrated Services Routers
 Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Key Features
Product Description
Product Overview Designed to deliver high-speed Ethernet services over Symmetrical High-speed DSL (SHDSL) access, the multimode G.SHDSL NIM (Figure 1) offers symmetric data rates over one to four pairs of copper wire and supports both EFM and ATM modes. To achieve higher bandwidths, bonding of multiple pairs (4-wire, m-pair, inverse multiplexing over EFM bonding) is supported. In EFM mode, the multimode G.SHDSL NIM allows bonding, as defined by IEEE 802.3ah, and is typically used in scenarios where individual links are aggregated using the 802.3ah loop aggregation. Depending on the number of wire pairs in service, the maximum data rate is 61.4 Mbps, with each line supporting up to 15 Mbps with 128-TCPAM. The NIM complies with the 2BASE-TL standard, which is based on the IEEE 802.3ah EFM standard. The 2BASE-TL standard uses the technology standard defined in ITU recommendation G.991.2 (G.SHDSL.). In ATM mode, the multimode G.SHDSL NIM allows bonding of multiple pairs up to four pairs (8-wire) with increased bandwidth by using data interleaving and m-pair mode. In m-pair mode, the multimode four-pair G.SHDSL NIM offers data rates up to 5.7 Mbps per pair and up to 22.7 Mbps over four pairs. (See Table 2 for the data rates supported by the multimode four-pair G.SHDSL NIM (NIM-4SHDSL-EA) under different modes.) The multimode four-pair G.SHDSL NIM cost-effectively allows service providers and enterprise customers to deliver Ethernet services to sites with no access to fiber by using bonded copper pairs with symmetrical bandwidth. These rates cover applications traditionally served by High-data-rate DSL (HDSL), Single-line DSL (SDSL), T1, E1, and services beyond E1. The multimode four-pair G.SHDSL NIM, together with the ISR 4000 series router, provides businesses the necessary bandwidth for critical traffic such as voice and videoconferencing and enables customers to save money by integrating voice and data traffic on the same WAN link. Service providers can increase subscriber revenue by bundling services and offering differentiated service levels through Service-Level Agreements (SLAs).
- Application/Usage: Data Networking
- Total Number of Ports: 1
- Connector Type: RJ-45
- Interfaces/Ports Details: 1 x RJ-45 G.SHDSL Ethernet
- Media Type Supported: Twisted Pair
- Ethernet Technology: Ethernet
- Network Technology: G.SHDSL
- Maximum Data Transfer Rate: 15 Mbit/s
- Compatibility:
Cisco 4000 Series Integrated Services Routers
|
|
|
|
|
|
|